Rahide Warning: Group KDE (K Desktop Environment) does not exist.

[root@lost ~]# yum groupinstall "KDE (K Desktop Environment)"
Loaded plugins: fastestmirror, presto, refresh-packagekit
Loading mirror speeds from cached hostfile
* rawhide: chi-10g-1-mirror.fastsoft.net
* rpmfusion-free-rawhide: lordmorgul.net
* rpmfusion-nonfree-rawhide: lordmorgul.net
Setting up Group Process
Checking for new repos for mirrors
Warning: Group KDE (K Desktop Environment) does not exist.
No packages in any requested group available to install or update
[root@lost ~]#

Huh?

[root@lost ~]# yum grouplist | grep KDE
KDE Software Compilation
KDE Software Development
[root@lost ~]#

Oooook! Apparently now it's called "KDE Software Compilation".

bash: !someActualEvent: event not found

Don't you hate errors like this?

$ strace -etrace=!futex -p 3181
bash: !futex: event not found

If this happens to you do not worry. Just escape the bang (!) like this:

$ strace -etrace=\!futex -p 3181
Process 3181 attached - interrupt to quit

The strace man page is wrong for bash. Imagine that.

Hope that helps.

I Don't Care Where You've Been

Here is my current guess at the chords and lyrics for this song. If you find better chords, let me know.

Pastor Mark has a great sermon for you.

Cannot retrieve metalink for repository: fedora. Please verify its path and try again

If you get this error, and you were running rawhide, do not worry. Just edit your /etc/yum.repos.d/fedora.repo file (again?) and change it from enabled=1 back to enabled=0. During the recent release of Fedora, yum has re-enabled your fedora.repo that you had previous disabled.

As of this blog post, it was the Fedora 12 release that did this again. The Fedora 11 release did the same thing. And, no, Debian Sid does not do this to you. I have been on Debian Sid for years, and it has never enabled any repos without at least prompting me first.

The folks on #fedora or #fedora-qa will not believe you though. They will taunt you with phrases like, "normal updates for thousands of people are working just fine", or "there are thousands and thousands of people who had their repo files updated, and they continue to get updates". But don't be discouraged by their "talk to the hand" attitude. Just edit your fedora.repo and set enabled back to 0, and move on with your life, and join me ... I am not one of the thousands and thousands of people who have never had a problem with updating a linux box.

You would not be on this page if your search engine had not led you here. I can tell from the referrers to this page. So I know you are just like me, just some idiot who is having problems udating their fedora rawhide box. We are walking together in this way. We are alike. Do not let the folks in the Linux community convince you that you are the only one on earth who has ever had a problem using their distro.

Note: the root cause of the error "Cannot retrieve metalink for repository: fedora. Please verify its path and try again" seems to be some kind of dns issue see this bug report. Again, I did not get this error again after re-disabling the fedora.repo and continued using rawhide.

Don Fransisco

If you have never heard his songs, start now:
Here is a link to the lyrics and chords. Go learn them.

In Him.

yum install meld

Click to enlarge and see meld in action. Melding itself.

The Eclipse executable launcher was unable to locate its companion shared library

Either your extractor was unable to extract the lib files, or it was unable to give the lib files the correct permissions. Do not worry. Here is the solution to your problem:

1. If you are a real developer just execute the following commands:

$ pwd
/cygdrive/c/galileo/eclipse
$ find plugins/ -name \*.dll
plugins/org.eclipse.equinox.launcher.win32.win32.x86_1.0.200.v20090519/eclipse_1206.dll
$ chmod 0755 plugins/org.eclipse.equinox.launcher.win32.win32.x86_1.0.200.v20090519/eclipse_1206.dll

Now you are done. The problem is fixed.

2. If you have never done development from the command-line, and you have not gone to boot camp to learn the new secrets for Vista this year, or whatever sad, proprietary jail cell you are in, then you will need to use a GUI to find the dll named above somewhere down in the eclipse/plugins directory, and give yourself execute permissions to it, and your problem will be fixed. The shortened, but still long, complicated list of clicks and steps probably goes something like ...

0. Stop crying and feeling sorry for yourself. As a windows user, you are simply a second class citizen, so just buck up and deal with it.
1. find the "eclipse/plugins/org.eclipse.equinox.launcher.win32.win32.x86_1.0.200.v20090519/eclipse_1206.dll" file using the Explorer ...
2. Right-click the file and select Properties.
3. Click on the Security tab.
4. Click Advanced in the lower right.
5. In the Advanced Security Settings window that pops up, click on the Owner tab.
6. Click Edit.
7. Click Other users or groups.
8. Click Advanced in the lower left corner.
9. Click Find Now.
10. Scroll through the results and double-click on your current user account.
11. Click OK to all of the remaining windows except the first Properties window.
12. Select your user account from the list up top and click Edit.
13. Select your user account from the list up top again and then in the pane below, check Full control under Allow, or as much control as you need.
14. You’ll get a security warning, click Yes.
15. On some files that are essential to Windows, you’ll get a “Unable to save permission changes… access is denied” warning and there’s nothing that you can do about it to the best of my knowledge.
16. Consider using something other than Windows. And stop your whining, "This didn't work for my favorite version of Windows XP" ... go to boot camp and learn the secrets for your version, or free yourself from learning new secrets. The chmod command has worked for over 20 years, and that fact is not likely to change tomorrow ... no boot camp secrets required.

Hope that helps.

Lauren's Daisy

Lana

Lana is a wondeful lady
Whose battle with cancer has been long
But all through this terrible illness
Her faith in God remains strong

She has always been a dedicated Christian
To follow Christ is the only way she knew
And this faith has given her strength
To survive the trials she is going through

Most of us with an illness like this
would have given up in dispair
we'd quit saying our prayers and tell outselves
Why pray? God just doesn't care

But not Lana. Her faith is strong
God knows that she has run a good race
He will send angels to guide her into his heavenly kingdom
And she will see Jesus face to face

Janet E. Salamone
August 28, 2009

Wade in the Water (remix)

Finally got around to making a video with a new version of this song on the uke ...* Here are some chords and lyrics I have been using.
* For the previous free mp3 versions of this song with the girls singing along go here.

Enjoy.

My Favorite Things

* Here are some chords and lyrics I have been using for this song on my little ukulele.

Enjoy.

Running rawhide, and having a problem updating today?
Symptom:

Error Downloading Packages:
kernel-PAE-2.6.31-0.125.rc5.git2.fc12.i686: failure: Packages/kernel-PAE-2.6.31-0.125.rc5.git2.fc12.i686.rpm from rawhide: (256, 'No more mirrors to try.')

Another symptom:

http://archive.linux.duke.edu/pub/fedora/linux/development/i386/os/Packages/kernel-PAE-2.6.31-0.125.rc5.git2.fc12.i686.rpm: [Errno 14] HTTP Error 200 : http://archive.linux.duke.edu/pub/fedora/linux/development/i386/os/Packages/kernel-PAE-2.6.31-0.125.rc5.git2.fc12.i686.rpm
Trying other mirror.

Do not worry. Just update the python-urlgrabber package: ‘yum upgrade python-urlgrabber’.

Hope that helps.

Friendship Blossoms

Each feels a need to be alone-and clandestinely hide away,
from the trials of our daily walk-and the nettles of each day.
But there's a need, yet deeper still, a very human element;
a need for love, for warmth and strength, a sharing of content.
God planted those first seeds of love, in the vale of Eden, there ...
I think some seeds lay dormant, 'til he molded friends to share.
That day the seeds awakened, took root, and sprouted high ...
as the friendships blossomed-God looked down through His sky,

As He looked, He whispered soft, "tis good-this blossom fair"
He stooped and picked a friendship flower and blew it on the air.
Like dandelions, they scattered, and where'ere a seed touched down
eventually, a friendship grew, in that garden of renown.
He intends for us to spread the seeds
and send them winging on the breeze ...
to fertile soil in someone's heart ... and to blossom ... He is pleased.
If we took the time each day, with care, to plant a seed ...
imagine all the friendship flowers would blossom and would lead ...
To more seedlings being planted ...
in more hearts, friendship would be;
then hate and greed would vanish, for all eternity.
It truly is a gift from God, to have a friend to share,
the glories of the moments ... as well as all our cares.

by Dot Chadwick (written in 1967)

The Bottom Line

I'm at the bottom line of all my needs
I'm blowing at the end of my reed
All of my wants have past away
now all I want is LOVE!
Now tell me when I'm in a situation
or a problem bigger than that
I'll turn my ways around
You help me I help you
We all stick together
at the bottom line!

by Kara.

For more of Kara's poems ... visit Kara's Colors

selecting duplicate rows

Ever wondered how to select only rows that have some duplicate from a field? Well, here is one way that worked pretty well:

select duplicate_column from table_with_duplicates where
(
   select count(a.duplicate_column) from table_with_duplicates a
   where a.duplicate_column = table_with_duplicates.duplicate_column
) > 1
group by duplicate_column

Hope that helps someone.

Baptism and Summer fun ...

We found a turtle ...What are you talking about?
Under a shroom ...
Grin :-)
Not ashamed.
Snack time ...
Getting ready ...
Baptized ...
Getting ready ...
Baptized ...
On the slide ...
Woah! ... (click to enlarge)

Fedora Rawhide ... cannot login. Symptoms and solution.

Here is what was happening, and how I fixed it. First of all, I had to reboot into "linux single" just so that I could get to root and read the log files. If you do not know what "linux single" is, email me, and I'll let you know.

Anyway, whenever I tried to login using the normal gdm interface, these messages appeared in /var/log/secure:

Jul 9 09:03:10 lost pam: gdm-fingerprint[930]: PAM unable to dlopen(/lib/security/pam_fprintd.so): /lib/security/pam_fprintd.so: cannot open shared object file: No such file or directory
Jul 9 09:03:10 lost pam: gdm-fingerprint[930]: PAM adding faulty module: /lib/security/pam_fprintd.so
Jul 9 09:03:21 lost pam: gdm-password[991]: gkr-pam: couldn't run gnome-keyring-daemon: Permission denied
Jul 9 09:03:21 lost pam: gdm-password[929]: gkr-pam: gnome-keyring-daemon didn't start properly properly
Jul 9 09:03:21 lost pam: gdm-password[929]: pam_unix(gdm-password:session): session opened for user geek by (uid=0)
Jul 9 09:03:22 lost pam: gdm-password[929]: pam_unix(gdm-password:session): session closed for user geek

Then when I tried to login using the console, these messages appeared in /var/log/secure:

Jul 9 09:03:30 lost login: PAM unable to dlopen(/lib/security/pam_fprintd.so): /lib/security/pam_fprintd.so: cannot open shared object file: No such file or directory
Jul 9 09:03:30 lost login: PAM adding faulty module: /lib/security/pam_fprintd.so
Jul 9 09:03:34 lost login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
Jul 9 09:03:34 lost login: ROOT LOGIN ON tty2
Jul 9 09:03:34 lost login: pam_unix(login:session): session closed for user root

Well this made sense after seeing the following:

[root@lost ~]# ls -l /lib/security/pam_fprintd.so
lrwxrwxrwx. 1 root root 20 2009-07-09 10:59 /lib/security/pam_fprintd.so -> pam_fprintd.so.0.0.0
[root@lost ~]# ls -l /lib/security/pam_fprintd.so.0.0.0
ls: cannot access /lib/security/pam_fprintd.so.0.0.0: No such file or directory

I'm not sure why the package called fprintd-pam.i586 installs a file that links to "No such file or directory". But removing fprintd-pam.i586 and gdm-fingerprint did not help.

The quickest solution for this issue was to disable selinux. Surely there is a better solution. If you know what that is, let us know.

Fedora 11: yum hangs on 'Setting up Package Sacks'

NOTE: this post was originally written after seeing this problem in rawhide. The problem persisted into Fedora 11, but all the notes below are for a rawhide configuration. The fix below works for the fedora.repo also.

---

If you are trying Fedora 11 and yum hangs showing the following output:

# yum -v update
Config time: 0.045
Yum Version: 3.2.22
Setting up Package Sacks
_

Do not fear. There are (at least) two reasons why you can see this issue. First, the problem may just be an intersection between your proxy's configuration and the default yum configuration. If you are behind a proxy, just edit the file /etc/yum.repos.d/fedora-rawhide.repo and change the default "mirrorlist" entry to use http instead of https as follows:

mirrorlist=http://mirrors.fedoraproject.org/metalink?repo=rawhide&arch=i386
enabled=1

Of course, you will need to leave the "arch" as x86_64 if you are installing on a 64bit machine. The default https that fedora has chosen will not work with many "transparent" proxy setups, so just change it to http, and you should be fine.

Note, all this assumes that you set up your proxy as follows:

# export http_proxy=http://my-semi-xparent-proxy.com:8080

And when you do run a yum update, run it like this:

yum -v --enablerepo=rawhide update

Alternatively you can edit the /etc/yum.conf file and add a line like this

proxy=http://my_proxy.com:port/

Which brings us to the second easy way to get yourself stuck staring at 'Setting up Package Sacks'. This came up when folks were updating Fedora 11 - preview ... that is, do not run it simply as "yum update" like I did, because it will look as though it does the update just fine, but it will break yum. Doing a simple "yum update" without enabling rawhide will enable the base fedora.repo and the fedora-updates.repo, which will also cause yum to hang at 'Setting up Package Sacks' again with the new "https" in the newly updated "fedora.repo".

Then again, you may enjoy having some extra time while you stare at yum hanging at 'Setting up Package Sacks' until it times out, I sure did ... it gave me enough time to write the following rant.

Remember ... this was the Fedora 11 preview, so you do not want to enable the normal repositories. This is a "feature bug" in my opinion. Doing an update should not change my enabled repositories without prompting me first. I say this is a bug because I have used Debian (sid) for years, and I have been using Redhat/Fedora for just as long, but I have never had this problem with Debian. Flame away.

Hope that helps.

UPDATE: Although this blog entry was for "Fedora 11 - preview" the solutions suggested here, as the anonymous comment below suggests, may also apply to Fedora 11 which has now been released.

Mother's day

Flowers from the kids
Asleep in the hammock
Mom with mom

All I Need Is God

Looks like my blue skies fade to gray
Looks like my pasture's gone away, but
I still don't need your golden cherubim

All I need is God
All I need is God
In the beginning
All I need is God
To survive
All I need is God
To help me all I need

By Kara

Error: 'CREATE VIEW' must be the first statement in a query batch

Have you ever gotten this error?

Error: 'CREATE VIEW' must be the first statement in a query batch.
SQLState: S0001
ErrorCode: 111

or maybe

Error: 'CREATE TRIGGER' must be the first statement in a query batch.

Well, do not worry. Here is how you can solve this issue: Just wrap your query with exec(''). For example, lets say your view is defined as

CREATE VIEW theView AS
   SELECT  tableA.id + '_' tableA.name AS ID_NAME,
      tableB.* FROM tableA a
   INNER JOIN tableB b ON a.a_id = b.b_Id

Well then just change your call as follows:

exec('CREATE VIEW theView AS
   SELECT  tableA.id + ''_'' tableA.name AS ID_NAME,
      tableB.* FROM tableA a
   INNER JOIN tableB b ON a.a_id = b.b_Id')

Notice that single quotes origninally in my CREATE statement are escaped as two consecutive single quotes after it is wrapped in the call to exec('').

You will get the error above, as I did, when executing the CREATE from within SQuirreL SQL, so apparently SQuirreL is attempting to do some 'innocent' things before the CREATE statement. Wrapping the CREATE in an exec forces SQuirreL to put the CREATE statement first in a separate execution plan.

Hope that helps you.

Fall Leaves

See those fall leaves falling from those fall trees? See the leaves falling? They are yellow, green, purple, and brown. Don't frown. Turn your frown upside down. Don't be a clown, 'cuz if your singing, you'll be slinging your love. See the fall leaves falling? Are you stalling? I think not, 'cuz it's getting alot better than I thought. Good night!

by Kara Singleton

Bubbles and smiles ...

Friends
Fruits
Up close
Exercise much?
Lounging
Sisters
Pucker
Bubbles
Giggles and smiles

Beach time ...

First, some watermelon ...
What is that?
Let's go to the beach!
Ooooo - kay ...
Are we there yet?
We are here!
Big sisters ...
Sea shells ...
Sunsets ...
Yay!

deploying with sftp or scp using ant ... Could not load a dependent class com/jcraft/jsch/UserInfo

Have you ever gotten this error?

Could not load a dependent class com/jcraft/jsch/UserInfo

You are not alone.

You will find a page here that is supposed to help you, but well, let's just say that technical people have a problem communicating sometimes. This problem can also occur if you are trying to run an ant task from within Eclipse that tries to scp or sftp some files.

So below, I will show you how I solved this problem by downloading the Java Secure Channel jar from here, and putting that jar in the $ANT_HOME/lib directory. For the solution to this same problem from within Eclipse, see the section below entitled Solving the problem for Eclipse.

The error and the solution:

The following box shows the build.xml file used, then the ant command line used to reproduce the error, which is immediately followed by the commands needed to solve the issue, and then the successful sftp of files to a machine called, "remoteBox".

$ cat build.xml
<project name="Life" basedir=".">
   <target name="deploy">
      <scp todir="${user}:${pass}@remoteBox.com:." sftp="true" >
         <fileset dir=".">
            <include name="**/foo.*"/>
         </fileset>
      </scp>
   </target>
</project>

$ ant -Duser=geek -Dpass=g33k deploy
Buildfile: build.xml

deploy:

BUILD FAILED
build.xml:4: Problem: failed to create task or type scp
Cause: Could not load a dependent class com/jcraft/jsch/UserInfo
       It is not enough to have Ant's optional JARs
       you need the JAR files that the optional tasks depend upon.
       Ant's optional task dependencies are listed in the manual.
Action: Determine what extra JAR files are needed, and place them in one of:
        -$ANT_HOME\lib
        -$HOME\.ant\lib
        -a directory added on the command line with the -lib argument

Do not panic, this is a common problem.
The commonest cause is a missing JAR.

This is not a bug; it is a configuration problem


Total time: 0 seconds

$ cp jsch-0.1.41.jar $ANT_HOME/lib/.

$ ant -Duser=geek -Dpass=g33k deploy
Buildfile: build.xml

deploy:
      [scp] Connecting to remoteBox.com:22
      [scp] done.

BUILD SUCCESSFUL
Total time: 2 seconds

So, the procedure above shows:
1. the ant build target I used with the scp task
2. the failure that will occur without the use of the Java Secure Channel jar
3. copying the jar to your $ANT_HOME/lib directory
4. the successful transfer of files using sftp

This has been tested with ant 1.6.5 and 1.7.1, although you will get the following error if you use sftp="true" with ant 1.6.5:

$ ant -Duser=geek -Dpass=g33k deploy
Buildfile: build.xml

deploy:

BUILD FAILED
build.xml:4: The  type doesn't support the "sftp" attribute.

Total time: 0 seconds

If you simply remove the sftp="true" attribute from the scp task, then the file tranfer works fine under ant 1.6.5 using the build target as shown above.

Solving the problem for Eclipse

Depending on your version of Eclipse, the exact menu option may vary, but it goes something like this in the Galileo version of Eclipse: Go to Window > Preferences > Ant > Runtime > Classpath (tab), select “Ant Home Entries (default)” and click “Add External JARs…”, then add the Java Secure Channel jar from above Then click Apply and Ok. Now Eclipse should be able to run ant tasks which scp or sftp files as noted above.

Hope that helps.

Going to the park ...

Here's looking at you, kid ...On the slide.On the swingIn Him.

Someone's Birthday ...

.
In the trees again

And again






It looks so high
Tickle giggles